• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. They don't get rotten or rusty like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and may even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the frame of the previous one easily. If windows with double glazed windows repairs panes are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this case it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you plan to attempt to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled.

Once the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional is able to come out and fix the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap is particularly large, you might think about the security door with an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they may be afflicted by a variety of problems including sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from worsening.

To repair a window that is sagging, you can try to reposition the hinges. You'll first need to open the windows to reach the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you aren't able to move the hinges you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it could be caused by the handle mechanism wears out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to close the window and perform an experiment fitting. The corner joints of the sash should be aligned with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is essential to take action if get up each morning to find mouldy walls and floors that are wet. The leaks of water from windows do can not only cause destruction of your home's structure but also hamper your efforts to control the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the problem the caulking that was used up might need to be removed before a new layer is applied. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage occurs between the double glazed window repairs-double glazed windows repairs glass it is more likely the problem is with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens in an ease. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Like any mechanical component, hinges can wear out over time. It's very simple to change a window hinge however it is easier if someone else helps you to hold the frame.

Check that the uPVC hinges are closed and open in the correct direction. This can be done by looking for the arrow on each hinge, this indicates which way the window should open.

The problem can be caused either due to opening the window in the wrong way or by a poor installation in the factory. This issue can be fixed by sending us a picture via our website and we will be more than happy to give you advice.

Regularly lubricating the hinges is essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more smoothly. It can also prevent corrosion and decrease the chance of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. Firstly the hinges, again due to wear and tear may become displaced, which can cause a gap to form where the sash joins the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is on the hinge side of the window and can be misaligned. Again, it may be possible to give them a good clean, but in some cases it might be necessary to get them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and will reduce the possibility of draughts.

Another method of reducing the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They can keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and it is more cost-effective to replace them than to repair them. So, if you're having issues with your upvc windows, it is best to seek professional assistance immediately.