• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your pet move around whenever they want without needing to let them in or out. They also prevent your cat from urinating inside the house.

It is simpler to install a cat flap on a upvc panel than on a glass one however, you'll require some knowledge and right tools.

Measure the Door

Fitting a cat flap in a door can be tricky but if you select the right kind of cat flap be patient and follow the instructions provided it should not prove to be too much trouble. We will be showing you how much to install a cat flap to mark out the shape, using an jigsaw for cutting out the door's area and then finish the job by attaching the flap to the door. This will ensure that the flap remains in place and protects the door from rain and wind damaging the door.

The first thing you need to do is measure the width of your pet in order to get a precise measurement of what size of cat flap you will require. This will ensure that the flap is large enough that your pet can go inside and out of the house without needing to open and close the door each time, yet small enough to stop them from moving too far either way.

Once you have the measurements you can mark out the location on the door where the template should be placed, usually, this is done using an X, however some kits come with drawings that show the location to drill, if yours does then stick it to the door and draw a line around it. If your door has a sill or moulding at the bottom, be sure you leave enough space between your cat and the moulding or sill.

Next put on your eye protection and dust mask, and using a jigsaw, begin cutting according to the lines you have pencilled in, don't try to press the blade too hard as this will make it cut faster than you would like it to. If you have an already-cut square, use it to check that you are cutting correctly and to ensure that the hole is a proper rectangle shape, once you are happy with this you can begin to remove the rest of the door material.

Draw a Line

The cat flap is a great way to allow your pet to go out and in without worrying about them coming in with guests or leaving unwelcome gifts in the house. It also prevents drafts and helps to keep the temperature in your home steady. However, fitting the cat flap to your door could be an overwhelming task for those who haven't done it before, which is why many people to call a professional joiner or carpenter to do the job instead. While this is definitely an option, it's possible to do the job yourself if you have the proper tools and follow instructions with care.

It is much easier to do with wooden doors, but it is still possible using uPVC. However you should be cautious not to harm the doors as this could cause the door to be damaged and invalidate your warranty. The first step in the process is to take measurements of the door, making sure that it can accommodate the new cat flap. If you have an ordinary uPVC panel it's easy. However in the case of composite or a different type of door, you may require more care.

The next step is to determine the height of your belly for your Cat Flap In Upvc Door Panel. This is the distance between the floor and the underside of your cat's stomach. It is important to locate an area on the door that allows your cat to pass through comfortably. Once you have the information, you'll need to mark the area using a spirit level and a pencil so that you know the opening will fit your cat.

After you have marked the area, it is time to cut the hole. You will require a jigsaw and it is crucial to take your time in order to ensure that the cuts are smooth and straight instead of rough and uneven, as this could damage your door. You should also remember to wear safety glasses and a dust protection mask whenever using the jigsaw, since dust from the saw could be harmful to your health. Once you have completed the cutting, you'll have to smooth out the edges of the hole using sandpaper so that your cat flap can be fitted easily in place.

Cut a hole

The process of fitting a cat flap into an existing door panel or double glazing sealed unit can be quite difficult. If you're not skilled in DIY, it's recommended to hire a professional to do the job for you. A faulty job can not only look ugly but also pose a security threat. It could let cold air to enter when the cat is outdoors and hot air out when the cat is inside.

Mark the hole's position on the door with the help of a pencil and a spirit level. This will ensure that it is correctly positioned and aligns with the door's other parts. It is important to have an sandpaper piece on the ready for any rough edges.

Wear the safety equipment you'll need to use an electric tool. If you're concerned about the noise, you can purchase a cordless jigsaw which is quieter and more user-friendly.

It is essential to only cut away the material needed for the fitment of the cat flap. It is essential to leave some extra material for the wall thickness of the cat flap. However, removing too much can cause issues or even damage to the frame of the door.

If the upvc door features a metal panel or frame, it may interfere with the microchip flap. In this situation you'll need make an oversize hole to ensure that the metal does not touch the walls of the flap.

If you want to install a cat flap inside windows made of double glazing cat flap-glazed or upvc with frames made of metal, you'll need to consult an expert. They will provide you with a brand new piece of glass with the hole already pre-made for the cat flap. It will be much cheaper to get this done rather than to attempt to fix a cat flap installation near me flap into an existing glass pane that was not designed specifically for this purpose.

Fit the Flap

Cat flaps allow your pet to leave and come as they please, giving them the ability to unwind in the home whenever they want to. However, if you have an upvc door panel replacement cat flap door, it may be difficult to fit a cat flap, especially when you don't have glass panes that can be cut to accommodate one. Luckily, if you're happy to purchase and install a half-glazed replacement upvc door panels with cat flap uPVC panel then it is possible to add an animal flap onto these doors. It's not as easy as simply cutting a hole through the door though and there are a few things you'll need to take care of first to ensure that it's secure.

A uPVC, GRP or composite door panel typically comprises an extremely thin plastic outer skin joined to a soft polystyrene insulating core. The material is fairly fragile and care must be taken when cutting through it to avoid causing damage. This type of door usually comes with a template drawing that you can use as a guide for cutting the hole in the door.

Once you've determined the location of the hole in your door, now it's time to install the flap. You can buy and [empty] fit various models that range from simple push-button operated models to ones that are activated by microchips that allow only your pet. However, no matter what type of cat flap you select, it is essential to ensure that your cat can use the flap without becoming stuck outside in the rain.

It's a good idea choose circular fittings rather than a square one, as circles are more securely cut into door glass. It's because square holes are more likely to crack the glass when they are drilled. This is also a safer choice since you don't have to drill into the toughened glass, which could break and hurt your pet or family members. This is especially important if there are children or elderly people at home who could be injured by glass shards.