• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

The freedom to let your cat go in and out of the house as it pleases is a great way to keep your pet active and mentally stimulated. Having a flap can also help reduce toileting accidents by making it easier for your cat to leave the house whenever it wants to.

Measure the Door

A cat flap allows your pet to go and come at their own pace, without having to open the door for them. This is ideal for keeping them in when you're at home or away, and helps keep unwanted pests out of your house as well!

It's important to measure the door prior to when you purchase a cat flap as there are a variety of sizes available. It is then possible to ensure that the cat flap is the correct size for the door you have. In the event that it is not, it could be too large or small, and your cat could be unable to use it.

Before doing anything but use a ruler to measure the length of the door in a variety of places along its edges. You should also measure the door's height in a few spots. This is because doors that are too high will cause your cat to do a gymnast's routine every time they need to use the flap!

Ask a glazier for assistance when you're unsure of how to measure the door. They should be able to assist you in determining whether or not your door is suitable for a cat flap and advise you on the right size of flap to purchase.

Once you've got your measurements, the next step to do is mark the outline of the hole in the door. This will help you when you cut the hole and save you money!

You must also ensure that the hole you're making is in the correct place. For example, if you're fitting the cat flap in a patio door, you must ensure that the hole is not too close to any hinges, since this could cause leakage and problems with the seal.

It is recommended to leave the task of installing a cat flap on glass doors to an experienced glazier. It can be very tricky to insert a cat flap into an existing glass pane, and you may be surprised to find that the process causes it to break and lose its weatherproof seal.

Measure the Cat

A cat flap step flap lets your pet to come and go whenever they like without having to leave them home to themselves. It can also stop draughts from entering your house, which aren't bad for you or your cat!

If you do have a upvc door panel with cat flap fitted or composite door it may be difficult to install the cat flap cover for winter flap. These doors are made from different materials, and the way they are installed is different. Before you decide to install a cat flap in your uPVC or composite door, ensure that it's compatible and that you have consulted the manufacturer because alterations could affect any warranties.

Generally speaking, these types of doors are built to be tough and durable and have insulation built-in. This makes them more resistant to weather elements than other doors, but they may be difficult to install a cat flap into. If you're unsure about whether your uPVC or composite door can accommodate a cat flap, consult with a professional joiner prior to beginning.

You'll need to take their height to ensure they pass through the door. It's easier to measure their height when they're calm or asleep, so that they aren't moving around. Once you know their height, take a measurement of the distance between their stomach and the floor to determine where the bottom of the cat flap should be. This location is marked on the door.

If your replacement upvc door panels with cat flap or composite door is made from metal (either steel or aluminium), you'll need be extra cautious when cutting it with power tools. The process of drilling into metal could cause cracks, particularly if the area is toughened glass. This is the reason it's advisable to hire an experienced glazier when putting your cat flap in a pane of glass. This will prevent the glass from breaking or becoming brittle. Glaziers can also provide you with a circular hole for the cat flap, which is less likely to crack and is safer for your cat to use.

Cut the Hole

A good cat flap should come with a template that you can use to mark the area on your door where the hole will go. If it doesn't, you can create your own with a thin piece of paper (tracing papers are perfect). Once the shape has been drawn in pencil on the door, you can then use your spirit level to ensure that the shape is horizontal. This will ensure that the cat flap sits properly in the opening and will not slide open or close.

Next, employ a jigsaw for cutting out the pattern that is marked on the door. Make sure that you're using a blade suitable for use on uPVC doors - usually it will be marked accordingly If not, ask the staff at your DIY store for assistance. Once you have the hole cut out and the flap section is in place, put it against it and push it open to ensure that the flap's movement is smooth. If it is bound at any point, use a filer or rasp to fix this.

It is also important to ensure whether there are no electrical cables or gas pipes inside the door that you will be cutting through since they could be damaged by the Jigsaw. Also, be aware of any handles or other door fixtures that need to be removed in order to make room for the cat flap and be careful not to damage them during the process.

Most people who fit a cat flap themselves will have an ordinary solid uPVC door, and therefore will not have to worry about any of these issues. If your door is made of wood or has a decorative part that cannot be removed, this will complicate the task.

It is always advisable to seek expert help from a cat flap fitter when it comes to these types of jobs as it is essential to do the job done correctly to avoid potential issues in the future. Making the wrong choice could lead to the door being damaged and may make it impossible to honor the warranty.

Fit the Flap

Once you've got your hole cut, put the flap in place to see if it fits and is able to open easily. If you notice any spots that stick or catch or stick, you can file them down using an sandpaper or hand file until it is a perfect fit and opens without issue. Make sure the flap is aligned with the door.

Some kits include templates for this, however, if it doesn't provide a template, you could make use of a piece of thin paper instead - something similar to tracing paper. Place the paper on the door and draw an area on which you'll will need to place the flap (this will serve as your cutting guide). Then using the pencil lines you've made on the door, draw four screw holes in the corners of the flap - these are the screw holes you'll use to put it in the right position.

Most uPVC doors are strong and therefore quite straightforward to cut into. If your door is constructed of composite or GRP, it can be more difficult. If you're not familiar with this then it may be advisable to hire an expert to complete the work for you. They will also be able to advise you on whether or not your specific door is suitable for cat flap installation.

It is possible to install a cat flap into composite doors. However, it's essential to consult with the manufacturer or a professional joiner before you do so since any modifications to these types of doors could void the warranty. If you choose to complete the task yourself, be aware that this could be a messy and potentially dangerous job.

You'll need to use a saw or grinder to cut through composite doors, rather than just the GRP. Be aware that this could be a very hazardous job and you'll have to take extreme care not to harm the door or yourself, as it is very fragile. It's important to remember that it's much more difficult to cut the door glass than a uPVC door or a solid wood door.